Harrisons Pharma Machinery Private Limited

Some of the other details are as follows:

• Automatic 300-holes capsule loading machine equipped for any one size of capsule with hopper, 1.4 HP 3 phase motor 1400 rpm and suitable gear box
• The complete body of the machine cladded with SS sheet

• Single Decker / Double DeckerAvailable in Models: 18", 30", 36" , 42", 48" dia

In accordance with the demand of the market and of our clients, we offer Dehumidifier GMP Model in varied technical specifications. The dehumidifiers made available by us are appropriate for high humidity areas approximately 3000 – 4000 cu. These fully portable dehumidifiers can work independently without any assistance.

Technical specifications:

• To operate on 230 volts single phase
• Complete with trolley
• Water collecting tank
• Mini starter

Models:

• HDV - 1500 (1. 5 Ton)
• HDV - 2000 (2. 0 Ton)

Other details:

• G. M. P. Model: M.S. body of the machine is cladded with SS steel sheet
• Optional: If digital humidity (rh) controller/indicator instead humidistat
• Ft with 3 - 4 occupants to remove excess humidity from the air
• Offered with hermetically sealed compressor of ‘Kirloskar’ refrigeration type

• The machine is mechanically hand operated, with all contact parts made out of stainless steel 202 quality, outside body of the machine made from M.S duly chrome plated. The unit is supplied with 1 No. stainless steel loading plate, powder spreader, powder dispenser brush etc. Supplied with one change part of any one size capsule of 0 No., 1 No. & 2 No. capsule as required.

• The machine is mechanically hand operated, with all contact parts made out of stainless steel 304 quality, outside body of the machine made from M.S duly chromeplated. The unit is supplied with 2 Nos. stainless steel loading plates powder spreader, powder dispenser brush etc. Supplied with one change part of any one size capsule of 0 No., 1 No. & 2 No. capsule as required
• Capsule Filling Machine (MODEL: HCF - 300):

• Suitable for filling 300 capsules at one time, the machine is mechanically hand operated with all contact parts made out of stainless steel. The machine is suitable for filling any one size capsule of 0 No., 1 No. & 2 No. capsule as required. The unit is supplied with 3 Nos. stainless steel loading plates, powder spreader, powder dispenser, etc.

Additional Information:

• Item Code: HCF300-Holes

i) Made of Aluminum. Properly anodized.

- For counting 100 Capsules

- For counting 250 Capsules

ii)Made of St. Steel 304 Quality (GMP Model)

- For counting upto 100 Capsules

- For counting upto 250 Capsules

iii)Made of St. Steel 316 Quality (GMP Model)

- For counting upto 100 Capsules

Octagonal blender is an efficient and versatile machine for mixing, lubricating and blending of dry powder and granules homogeneously for facilitating better flow ability of the material for tableting and capsules.

The basic machine consists of product mixing drum. A drum fitted with both ends by hub shafts which are given support on pillow block bearing. The complete drum assembly mounted on “A” type fabricated structure which is S. S. 304 quality cladding. The drive unit consisting of the motor, reduction gear box, chain coupling, and control panel.

The machine meets cGMP's requirements with contact parts of S. S. 304 quality and non-contact parts of S. S. 304 or cladding / covered. All welded joints are argon process ground and well polished to mirror / matt finished. The mixing drum is mirror finished from inside and outside.

The mixing drum is fitted with baffles for uniform mixing and breaking of lumps. The baffles made from S. S. 304 quality pipes which are fitted with stud and nut and can be easily removed and refixed for cleaning.

The mixing drum has two sides opening. One is fitted with 200 mm diameter butterfly valve with silicone seal and having the arrangement to hold IPC and loading arrangement. The other side is fitted with a man hole door bolted to the side with silicon gasket. The entire machine is provided with safety hand really made of S. S. 304 quality pipes. The entry gate shall be provided with the limit switch to ensure the safety of the operator.

The separate control panel fitted on the machine with the digital timer, “A meter & “ON – OFF” push button. Also, hand wheel provided for manual tilting of mixing drums.

- 250 Ltr. (100 kg) capacity/2 HP motor/3-phase

- 500 Ltr. (200 kg) capacity/5 HP motor/3-phase

- 800 Ltr. (350 kg) capacity/7.5 HP motor/3-phase

These Stainless Steel Scoops are specially made and properly grounded at the joints, so as to minimize the risk of sticking of powders & cross contamination. Stainless Steel Scoops are with s.s handles and highly polished.

Specifications:

• Available: 125gm to 2 kg. capacity.