Harrisons Pharma Machinery Private Limited

We are offering a wide range of Volumetric Liquid Filling Machine.

Specifications:

• Standard table model machine
• Complete in all respects with two filling heads and all contact parts of SS-304
• Filling capacity of syringes from 15-125 ml on both sides
• Adjustable nozzle
• 0.5 HP/3 phase elec. motor, starter and suitable reduction gear box
• Quantity adjustment device with filling speed 26-30 bottles per minute/single stroke

• Specification - as above - with filling capacity of syringes from 50 – 250 ml, on both the sides
• Specification - as above - with filling capacity of syringes on one side 15 – 125 ml & on the other side 50 – 250 ml
• Specification - as above - with filling capacity of syringes up to 100 – 500 ml with 1 HP/ 3 phase elec. motor

Optional features (if required):

• Special long type model of the filling machine mentioned above
• Can be provided with table height adjustment, SS-bottle resting tray
• Provision for adding conveyor to this machine at any later stage

Extra syringes for volumetric filling Machine:

• 3 to 30 ml capacity SS-304 complete syringe
• 15 to 125 ml capacity SS-304 complete syringe
• 90 to 260 ml capacity SS-304 complete syringe.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

P. P. Cap Sealing Machine is used for pilfer proof capping of bottles, capacity to seal 1500 to 2000 bottles/ hr. depending upon the efficiency of the operator, complete with bottle resting tray, dies for sealing 22,25 & 28mm neck bottles. The machine can be adjusted easily according to requirement. The unit is complete with ¼ HP motor of Crompton make and starter etc. The body of the machine is cladded with stainless steel sheet.

Plastic Cap Sealing Machine is used for capping of bottles, capacity to seal 1500 to 2000 bottles/ hr. depending upon the efficiency of the operator, complete with bottle resting tray, dies for sealing neck bottles .The machine can be adjusted easily according to requirement. The body of the machine is cladded with stainless steel sheet. The unit is complete with ¼ HP motor of Crompton make and starter etc. Supplied with one no. die of your given sample.

Other details:

• Base plate on which filled container rests is fabricated using SS sheet
• Machine is suitable for filling 5 ml/gm to 50ml/gm range
• For all types of liquids/semi-solids, creams pests, inks in tubes, jars cans and bottles

Specific features:

• Filling speed: 10 to 12 tubes or containers per minute
• Specification - as above - but fitted with 30ml to 125 ml
• Filling cylinder and hopper of 22 l capacity
• Extra liquid filling nozzle 5 ml -125 ml capacity
• Extra semi-solid filling nozzle for jars/tubes

Specifications:

• For filling liquids, semisolids etc. in the filling range of 15 ml/gm to125 ml/gm, with SS-304 hopper of 22 kg/Lt. Capacity and all contact parts of SS-304, ½ HP standard elec
• Motor suitable reduction gear box, one filling nozzle etc. machine all covered with SS top and heavy duty castors
• Filling speed of 16 to 20 counts per minute/single stroke
• M.S. body of the machine cladded with SS sheet.

Available variety:

• Routine model
• G.M.P. model.

We are one of the trusted manufacturers of top-notch quality Bottle Drying Oven. Following the industry guidelines and quality norms, we manufacture these bottle drying ovens. We manufacture these pharmaceutical equipments using best quality factor inputs, under the strict supervision of our quality inspectors. Our clients can avail these bottle drying ovens from us in both standard and customized specifications.

Specifications:

• Complete in all respects with 8 M.S crates to hold 240 bottles of lb. size/per loading, with 1 HP/3 phase elec
• Motor, fan for uniform heat distribution, starter, indicators, thermostat, 6 kw special tubular heaters
• Complete body made out of MS sheet of 16 swg thick
• Double walled housing with best quality glass wool insulation
• Machine duly painted and finished - inner chamber given special heat resistant aluminum paint

Accessories:

• Single door model machine
• Double door model (special type) machine
• Extra crates - Made of MS, crates are duly anodized, suitable to hold 240 bottles of lb. size/per loading

We are one of the pioneers in the field of manufacturing and supplying qualitative Rotary Bottle Washing Machine. The machines made available by us are extensively used to wash bottles of various sizes in different industries. To meet clients' exact demands and needs, we offer these rotary bottle washing machines to them in both standard and customized specifications.

Other details:

• Two stainless steel tanks
• One for hot detergent
• Another for fresh water
• Both are fitted with independent stainless steel centrifugal pump

Things to be remembered:

• The hot detergent tank shall be fitted with thermostatically controlled heater.

Specifications:

• Motor for main drive: 0.5 H.P 415 V. 3 Phase
• The driving mechanism shall be arranged at the bottom in an enclosed cabinet.
• All the contact parts shall be quality stainless steel made and polished to necessary finish & M.S. parts shall be fine painted.
• Unit with 64 Jet

Operation:

• The empty bottle to be washed shall be arranged manually on the rotary disc of the machine.
• These bottles are automatically carried to the station, where they are internally & externally washed, first with tap water and purified water.
• The washed bottles are again taken out manually and arranged on a bottle dryer crates.

Complete in all respect with all contact parts of s.s.-304/316, mounted on heavy angle frame hanger, arrangement for height adjustment, with impeller of specially designed to suit the HP of the drive, motor protected with four studs, rotor encaged with four studs & bars, complete with motor, starter and one classifying screen of any desired mesh.

Mixing Capacity:

• 50 lt. Mixing capacity, with 1HP/3 Phase motor
• 100 lt. Mixing capacity, with 1HP/3Phase motor.
• 200 lt. Mixing capacity, with 2HP/3 Phase motor
• 300 lt. Mixing capacity, with 3HP/3 Phase motor
• 500 lt. Mixing capacity, with 5HP/3 Phase motor

We are offering wide range of Filter Press Machine. Complete in all respects, all contact parts of s.s-304/316 quality, 8”/14" dia plates, transfer gear pump of s.s- 304, with suitable elect. motor, 6-Plate / 10 -Plate model machine, with s.s.-filter holder. Plates assembled in a cartridge with interlocking kin cups. All mounted on s.s covered to pipe trolley - portable type.

Compete in all respects, designed for packaging/ transportation operations of the inspected strips, cartons packs, etc. with 9" / 12" width superior quality, P.V.C coated belt at the center, having 12-inch width s.s. top working table on both sides of the conveyor belt, driven with suitable geared motor, DOL starter and roller, with S. S. pipe legs & frame, height adjustable between 28” to 32”.

Other Details:

• VFD (variable frequency drive) to control the speed of the conveyor belt
• GMP Model

• Available: upto 500 ltr. capacity.

Other Details:

• Gear Pump: Suitable to transfer the viscous material from Barrel / Tank to another container, complete Rotary gear pump of S.S 316 quality with 0.5 HP / Single-phase motor mounted on trolley cladded with St. Steel Sheet fitted with starter etc
• Centrifugal Pump: Made out of stainless steel quality of material & provided with high quality of mechanical seal TC/TC. The unit is provided with motor and starter. The unit is mounted on S.S. trolley. Capacity 1500 to 4000 ltrs./hr.
  

We have been able to achieve immense success in the industry by delivering quality-approved High Speed Dissolver Stirrer Machine to the clients. The range of dissolver and stirrer offered by us is fabricated in compliance with international standards of quality. We make use of finest grades of raw material in the manufacturing process of these pharmaceutical equipments.

Specifications:

• Self balancing type
• 3 variable speed
• All contact parts of SS-304 mechanical height adjustment system
• Suitable electric motor
• Heavy MS base & pipe stand complete with motor starter
• 10 HP/3 phase electric motor

Variety available:

• 500 Lt. batch cap. with 3 HP/3 phase electric motor
• 1000 Lt. batch cap. with 5HP/3 phase electric motor
• Extra heavy duty model for 2,500 ltr batch

• Construction aisi S.S 304 quality
• Height adjustable 800 mm 50 mm
• Suitable for different type of container
• S.S elegantly matt finished body
• Speed variable step pulley systemUtility Requirement
• Electrical supply : 3 phase
• Neutral earthing electrical load: 1. 0 kw

Industrial Motorized Stirrer is with thick type s. s stirring shaft with stainless steel paddle for uniform liquid stirring, directly coupled to the motor. The height adjustment of the stirrer is by sliding of channel, with mechanical device. Complete in all respects with all contact parts of Stainless Steel 304 quality, mounted on m.s angle frame Stand cladded with St. Steel Sheet.

Specifications:

• Available: 25 ltr to 600 ltr capacity.

Other Details:

• Body of the pump of C.I., with Inlet Pipe & Outlet Bend, made of Stainless Steel– 304 quality.
• Polycarbonate- Food Grade. Suitable for all types of chemicals.
• GMP Model- Body of the pump Made of S. S. 304 quality with Inlet Pipe & Outlet Bend, made of Stainless Steel – 304 quality

• Made of single-layer stainless steel structure.
• Materials are all sanitary stainless steel.
• Humanized structure design and easy to operate.

Motorised Label Gumming Machine is to smear uniform gum to the labels The brass made Gum Pot is provided with Doctor’s Knife for removal of excess gum from the label. The unit is complete with rollers, 3 label lifter, all brass made. The label to be gummed is kept on the top plate made of St. Steel. The machine is fitted on wooden mica board, with Crompton motors, Cord and Plug etc.

Over these years, we have managed to emerge as a leading manufacturer of Bottle Washing Machine. The wide gamut of superior quality Bottle Washing Machines made available by us has helped us garner a rich clientele in the market. These machines are designed and developed incorporating advanced technology and latest machines. Further, to meet the exact application requirement of clients, we offer these pharmaceutical machines in customized specifications.

Offered accessories:

• Two SS-304 brushing heads
• Motor, with suitable covering, duly painted and finished

Specifications:

• Floor model machine (without tanks) – routine model
• Floor model - all covering with stainless steel
• Sheet with S.S. drill chucks for brushes
• With two GI tanks 22” x 18” size, 12-Jet
• SS-rinser and M.S angle frame stand
• SS-rinser and M.S angle frame stand